Cabinet bring elegant and classic look to every Modern Bedroom Vanity. Converting an agency into a bedroom vanity can be an easy task when you know what to do. This project requires removing the top of the chest of drawers, adjusting the drawers around the plumbing, and mounting a new vanity worktop to the chest of drawers.
Remove the top Bedroom Vanity. Unscrew the face of the drawer from the drawer base, using a screwdriver. Attach the box directly to the chest of drawers base with wooden glue and small screws (which do not extend through the drawer front) from the inside of the chest of drawers. This can be difficult, so you may want to wait until the beginning of the agency is removed. Unscrew wooden board from top of chest of drawers. The screws are on the inside of that chest of drawers. If the top does not screw, you may need to use a jigsaw to cut off the top dresser.
Rub white chalk on bedroom sink plumbing in wall. Have a partner gently press agency against plumbing. This will “mark” the dresser and allow you to see where the plumbing holes need to be cut. Use a drill and hole saws of the right size to cut holes for plumbing. Install the sink and vanity top on top of the chest of drawers. Apply a small string of seal around the top to the chest of drawers. Place Modern Vanity top on top of seal. Leave to dry and install the sink and faucet. Follow the manufacturer’s instructions for installing the sink and faucet. Connect the sink to the plumbing in the wall.